FW/HTS Multiple Classifying Wheel Classifier with Carboxymethyl cellulose

FW / HTS MULTIPLE CLASSIFYING W HeL CLASSIFIER WITH CARBOXYMEL CELLOLOSE Principle and Features: When the compressed gas enters the pulverizer by the feeder, the raw material enters the pulverization room, there are multiple pulverized nozzles in the pulverizing room, and the supersonic air flow is sprayed. The material is subjected to high speed impact on airflow and the material collision, friction, and pulverize the graded tube, the coarse particles are separated, and the coarse particle circulation continues to be pulverized. After the internal closed circuit is pulverized, the distribution is uniform. Ultrafine powder. 1. Suitable for dry ultra-micro processes. Due to the large impact speed, it can be more than 2.5 mep, in general, it is easy to obtain 1-10 micron particles, depending on the properties of the material, it is possible to obtain less than 1 micron particles. 2. Because there is a closed circuit classification mechanism inside the pulverizer, the product is thick The particles constantly circulate, and thus the particles are uniform and the particle size distribution range is obtained. 3, the equipment has the advantages of short smashing time, simple structure, convenient operation, small area, low noise (72 decibel) and no vibration. 4, the efficiency is high when pulverization, can be pulverized, and the purity of the pulverized product can be maintained.

Let me introduce you to the FW / HTS Multiple Classifying Wheel Classifier with Carboxymethyl Cellulose's operation method. 1. First check before using a crusherWhether all fasteners of the machine are tightened and the belt is fastened. 2. The spindle direction must be consistent with the direction of the arrow on the shroud, otherwise it may damage the machine and cause personal injury. 3. Check if the crusher is complete. 4. Check if the airflow pulverizer has a hard object such as a metal in a crushing room, otherwise it will damage the tool and affect the machine. 5. You must check the purity of the material before crushing. Metal hard materials are not allowed to avoid damage to the tool or cause combustion. 6. The oil cup on the machine should always note full lubricant to ensure that the machine is operating normally. 7. The feeding should be stopped before stopping. If you do not continue to use, remove the residers from the machine. 8. Regular inspection tools and screens are damaged. If damage is damaged, it should be replaced immediately. 9. There is a slight vibration when using the fuselage. Be sure to tighten the cover to connect the handle to avoid accidents.

Our company produced FW / HTS MULTIPLE CARASSIFYMEL CLASSIFIER WITH CARBOXYMEL CELLLOSE not only from 20-2μm from the ordinary powder, but also directly with mechanical pulverization equipment, forming closed circuits Improve the crushing efficiency, and can avoid high temperatures in the cavity to cause adhesion, glue, causing the operation to be unable, and the grading machine has also received a wide range of users, and the friends who need it will contact us!