FW/HTS Multiple Classifying Wheel Classifier for precipitated silica

Modern production not only pursues production and finished product quality, but also develops in the direction of environmentally friendly energy. In particular, in the comminution industry, the overall development trend of my country FW / HTS MULTIPIPIPIFYING WHEEL Classifier for Precipitated Silica technology is stable and developed towards the rate, strong control, high quality.

FW / HTS Multiple Classifying Wheel Classifier for precipitated Silica Great kinetic energy by using materials under high-speed airflow, causing severe friction between high speed collisions and particle in the pulverizing chamber, while high-speed airflow produces shears Subject to the purpose of pulverization.

Today, let's take a look at how the FW / HTS MULTIPE CLASSIFYING WHEEL CLASSIFIER for Precipitated Silica is maintained. First, the wind turbine 1, because the blades in the fan are particularly easy to accumulate, so it is necessary to clean the dust in the fan every week. 2, put the bearing chamber once a month. 3. If there is an abnormality in the fan, it is necessary to stop the ultrafine airflow classifier for inspection. Second, the host 1, should check the grading impeller, spiral feeder, smash nozzle each year, see if there is wear, isNo place to replace. 2, run to a certain amount of time, in order not to affect the use of the ultrafine gas flow classifier, some parts must be cleaned. 3, the bearing should make the right amount of lubrication, too much will abnormally. Third, the planet waste valve 1, if the ultrafine airflow classifier has an abnormality, it must be downtown immediately. 2, the impeller and the body's inner warehouse should be cleaned every three months. 3, plus lubricants must have once every three.

The crushing equipment developed by ALPA Technology has been applied in many actual engineering cases, providing basic information for objective understanding of jet grading technology.