FW/HTS Multiple Classifying Wheel Classifier for ammonium sulphate

FW / HTS Multiple Classifying Wheel Classifier for AMMONIUM SULPHE uses the material to achieve huge kinetic energy under high-speed airflow, causing high speed collision and severe particle in the pulverization chamber Friction, while the high-speed airflow produces shear effects to the material to achieve the purpose of pulverization.

FW / HTS Multiple Classifying Wheel Classifier for Ammonium Sulphate is not small, and the material is stacked in the silo plate knot, and the material is marked. The material has a bridge in the silo. The silo cone angle design does not have a recording element of the reference material. Solving silo does not smoke suggests design phase to fully understand the properties of material, such as pile specific gravity, liquidity, moisture resistance, rest horn, particle size, flammable and explosive. Adding auxiliary measures, such as air disc, a hammer, air blowing, vibrating mitigation mechanism, artificial beats, etc. The pulverizer is an apparatus for ultrafine pulverized dry materials with air separation, heavy polishing, and shear. It consists of a cylindrical crushed chamber, a polishing wheel, a polishing rail, a fan, a material collection system, and the like. The material enters the cylindrical pulverizing chamber by the feed opening, and is crushed by the polishing wheel that is circumferential movement along the grinding rail, and dissensibly. The pulverized material brings out the pulverizer through the negative pressure air flow caused by the fan, into the material collection system, filtered through the filter bag, the air is discharged, the material, the dust is collected, and the pulverization is completed. FW / HTS MULTIPLE CLASSIFYING WHEEL Classifier for ammonium Sulphate's feeding system is one of the key components. It is often encountered in actual use. For example, the silo is not affected, and the feeding is not uniform, and even can't feed. Simple analytical materials with unevenness of feeding are more sticky or fluidity, and the feeding system design is defective. Feeding uneven solution recommendations According to the material properties of materials, such as silhouette structures, auxiliary sheet structures, feed valve structures, auxiliary feed, and ventilation and control systems. The feeding system is generally silo, auxiliary tablet equipment, feeding mechanism three parts, depending on the material properties, feeding systemDifferent parameters. The above is the use of the FW / HTS MULTIPLE CLASSIFYING WHEEL Classifier for Ammonium Sulphate product and a simple solution, everyone must pay more attention when using it.