Horizontal Single Classifying Wheel Air Classifier with slag

Horizontal Single Classifying Wheel Air Classifier with SLAG works by a grace machine, a cyclone separator, a dust collector, and a ventilator. Under the pulverizer pulling force, the lower end of the gas pulverizer is moved upward to the grading area, and the coarse, and the fine product is separated from the high-speed rotation grading turbine. The cyclonic separator or dust collector is collected by the grading wheel, and the fine particles required to meet the particle size are collected, and the coarse particles are collected. The speed of the ellable fine particles disappears and falls along the two air ports of the cylinder wall. The crude particles and fine particles separated by strong purification of the two winds, and the fine particles rose to twice the grade region, and the crude particles drops to the discharge port.

How to install Horizontal Single Classifying Wheel Air Classifier with Slag, the following content hopes to help you. 1. Chinese medicine shredder should be more smooth and easier to use. 2. Before working in traditional Chinese grinding machines, a clean processing material must be selected. Hard metal, such as metal or stones, can not be mixed into the machine, so as not to damage parts or faults. 3. Before the machine is opened, check whether the components of the machine are firm and reliable. Everything is normal, so you can work. 4, turn on the power, turn for 1-2 minutes, check whether the operation is normal, normal conditions, can put the material. When the crusher is working, the operator cannot leave. Once the sound is abnormal, the power should be broken immediatelyopen. In the new pulverizer raw material, the exit is fixed with a long bag. 5. When using the pulverizer, if the power supply voltage is too low, do not use it to avoid damage to the motor. The power supply is used normally, it is not easy to damage, and the production efficiency is high.