FW/HTS Multiple Classifying Wheel Classifier for Modified starch

In this economically booming area, there are many people who know the airflow pulverizer, FW / HTS Multiple Classify Wheel Classifier for Modified Starch technology is in a leading position in the same industry.

FW / HTS MULTIPLE CLASSIFYING W HeL Classifier for Modified Starch Ultrafine Crushed Algebility, Materials After extracting treatment, the nature of the powder will change, and it is high viscosity after being affected. Easy to cake. Powder is extremely prone to aggregation in the feed opening, pulverizing cavity and exhaust pipe, requires special treatment processes and specific design. Shandong ALPA Powder Technology Co., Ltd. Designed and developed material smashed hit on the crushing of materials. FW / HTS Multiple Classifying Wheel Classifier For Modified STARCH Compressed Gases The high-speed jets generated by the feed nozzles The material particles in the bucket are introduced into the disc pulverity, and several jet nozzles are provided around the crushing chamber. The high-speed fluid is injected, and the ultra-high speed swirl rotation is generated in the pulverizing chamber. The coarse particles in the opposite ultra-high-speed swirls in the ultra-high-speed swirls produced impact and friction in the intersection, and the particles were quickly pulverized. When the particles are pulverized below the fractional particle size below the fractional particle size, the centrifugal force of the particle movement is reduced, and the grading swirling is separated from the center outlet under action, and is collected from the center outlet. Such a pulverizer, the motion of the particles can be decomposed into two components in two directions in the intersection. In one direction, the direction of movement of the particles is substantially consistent, and there is no significant impact pulverization effect, and only in the other direction, the particles are opposite, and the particles produce effective impact. Therefore, this impact of this intersection is limited, and the energy of ultra-high-speed moving particles is not fully utilized, so the production energy consumption is still high.

FW / HTS Multiple Classifying Wheel Classifier for Modified Starch features: 1, crusher production, low energy consumption, gradingefficient. 2, particle size concentration: Crusher uses the original impeller for grading. Stable grading technology and special sealing measures effectively prevent leakage of crude particles, so that the product has no large particle size, with high classification accuracy. 3, the structure is reasonable, the pulverizer can produce 1-6 products at the same time according to user requirements. 4, strong applicability: Crusher can be combined with all kinds of Mills (air compressors, mechanical ball mills, ball mills, Raymond grim, vibration mill, etc.) to form closed or open joint operations. 5, high automation level:

FW / hts multiple classified wheit classifier for modified starch is a crusher, any mechanical equipment, has certain precautions before use, must check the precautions, To operate, reduce the damage rate to the lowest, what is the precaution before using a jet ball mill? Here are some introductions. 1. Check whether the firmware is tightened before use, whether the spindle direction is correct, so as not to damage the machine. 2, the pulverizer should be lubricated in accordance with the requirements to make the machine operating properly. 3, the material cannot be mixed before the grinder is added to avoid damaging the pulverizer. 4, the pulverizer does not have foreign matter or debris. If it should be handled in time to avoid damage to the tool. 5. When using the crusher, if there is abnormality, it should be handled immediately to avoid a large loss. 6. If damage should be replaced immediately, certain components should be checked regularly.