pin mill for spices

pin mill for spices is a very convenient device to use, it can be used attrition milling of various products, especially those products need to use fine particles was crushed particle size range of

pin mill for spices of wide, easy to operate, but in the process of crushing, crushing effect is often not the same situation.
The crushing effect is mainly affected by the following factors:

The temperature and pressure of the gas ratio, the feed particle size, the working fluid, and the pulverized aid. The gas-solid ratio of the pulverizer is an important technical parameter and an important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which in turn affects the fineness of the product. However, if the gas is too high, it will not only waste energy, but will even degrade the dispersion performance of certain pigments.
When pulverizing hard materials, there is a stricter requirement for the particle size of the feed. In terms of titanium powder, it is necessary to control 100 ~ 200 mesh when pulverizing calcination; the material after the pulverization surface is generally 40 to 70 mesh, and cannot exceed 2 to 5 mesh.
So, should you choose how high pressure when crushing? Those skilled in the art depends primarily on the comminutability and fineness requirements of materials.

ALPA aluminum powder pin mill for spices experiment: an environmental technology company due to production needs, the need for graded ultrafine aluminum silicate, can not be achieved because of the uncertainty demand, so incoming conduct the experiments, our experiments ALPA air classifier device may be provided by the aluminum superfine grade, and finally through experiments of product size: D90: 18.3μm, yield: 460kg / h plus quantity
have welcomed the major. the powder classifying the needs of manufacturers, to visit the plant, incoming experiments.