cell mill of Calcium fluoride

Calcium fluoride is an inorganic compound with the chemical formula CaF2, which is a colorless crystal or white powder. It is hardly soluble in water, slightly soluble in inorganic acid, and reacts with hot concentrated sulfuric acid to generate hydrofluoric acid. The experiment generally uses calcium carbonate and hydrofluoric acid to react or repeatedly treat fluorite powder with concentrated hydrochloric acid or hydrofluoric acid to prepare calcium fluoride. Calcium fluoride minerals in nature are fluorite or fluorspar, often in gray, yellow, green, purple and other colors, sometimes colorless, transparent, glassy luster, brittle, and significant fluorescence. Very pure fluorspar is used to make special lenses.

Calcium fluoride minerals in nature are fluorite or fluorspar, which are gray, yellow, green, purple and other colors due to different impurities. Sometimes colorless, transparent, glassy, brittle, with a relative density of 3.01～3.25. Significant fluorescence phenomenon. The synthetic pure calcium fluoride crystals are also colorless and transparent. Very pure fluorspar is used to make special lenses. Fluorite is mainly used as a flux for smelting metals.

With the continuous advancement of pulverizer technology, Cell Mill of Calcium Fluoride has been familiar with people. The most popular crushing equipment is now the Cell Mill of Calcium Fluoride. It has a wide variety, available in laboratory, home and factory use. It has the advantages of large productivity, low energy consumption, high automation, and high classification quality, and has been widely used.

Many manufacturers who want to make a crushing process will choose to buy a Cell Mill of Calcium Fluoride, but not all crushers can apply production and processing, and the wrong processing method will make the pulverizer wear speed becomes fast. . The wear of the pulverizer is too fast, and the inner cavity of the pulverizer of the comparison should be used when the material hardness is too large.

The device operates for a long time in a higher pulverized pressure, which requires uniformity of cyclical replacement loss.

The products after the crushing are generally single peaks. If there is a double-peak or peak main reason, the pulverization pressure is unstable. The solution is based on the gas supply of gas source equipment to meet the amount of gas required for work, ensuring that the lowest air supply pressure of the gas is high than the working pressure.
The feed speed is unstable. Solution to check if there is a blockage at the feed valve; the material is not very viscous, uniform in liquidity, and the stable control feed speed. The filter cake is formed in the pulverizer chamber. The solution is suspended, and the filter cake in the pulverizer chamber will then restore production.