Hammer Mill of Potassium carbonate

Hammer Mill of Potassium Carbonate is an industrial equipment. With the development of society and the needs of people's lives, the industrial community is increasingly demanding various fine powder, and the fineness, purity and pass rate requirements are also It is increasingly high, and the application of the classifier is increasingly wide.

The crushing effect is mainly affected by the following factors:

The temperature and pressure of the gas ratio, the feed particle size, the working fluid, and the pulverized aid. The gas-solid ratio of the pulverizer is an important technical parameter and an important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which in turn affects the fineness of the product. However, if the gas is too high, it will not only waste energy, but will even degrade the dispersion performance of certain pigments.
When pulverizing hard materials, there is a stricter requirement for the particle size of the feed. In terms of titanium powder, it is necessary to control 100 ~ 200 mesh when pulverizing calcination; the material after the pulverization surface is generally 40 to 70 mesh, and cannot exceed 2 to 5 mesh.
So, should you choose how high pressure when crushing? Those skilled in the art depends primarily on the comminutability and fineness requirements of materials.
ALPA Activated Carbon Hammer Mill of Potassium Carbonate Case Sharing: This customer is a research institute Dalian, which requires ultrafine pulverizing activated carbon during research. Investigate a number of domestic manufacturers, and finally choose to work with our AlPa, and purchased a Hammer Mill of Potassium Carbonate.

I want to know more product knowledge and continue to pay attention to our website. If you need to buy Hammer Mill of Potassium Carbonate, please feel free to contact us.