Turbo Mill for phenolic resin

It is well known that Turbo Mill for Phenolic Resin This product technology has been widely valued by the industry.

The principle of pulverization is substantially the same as the hydraulic level, and the above settlement theory can also be used for airflow classification. However, in the airflow classification, since the density and viscosity of the air are much smaller than the density and viscosity of water, the same particles are more settled in the air than in the water. Moreover, the density and viscosity of the air vary with temperature and pressure.

In order to cause air flow, wind pulverization equipment typically requires an appropriate fan (exhaust or blast).

When the airflow is classified, the fine product is usually taken away by the airflow. In some cases, the raw material is sent to a pulverized device from the airflow.

As is well known, the load of solid particles in the air under normal pressure does not exceed 500 g / m3 air. When it reaches 1 kg / m3, the particles fall from the airflow. The load is related to the density and particle size of the particles. When the fine particle material is treated, the load generally does not exceed 200 to 300 g / 3 air. According to this calculation, the volume concentration in the gas stream is much smaller than 0.03. Therefore, when the airflow is classified, in most cases, it belongs to the free settlement.

The speed required to move the particulate material in the horizontal and vertical direction is relatively large, and the speed required in the horizontal direction is relatively large, and as the particle density increases, for example, for the density 1.5 of the pulverized coal and Western / cubic centimeter. The minimum wind speed is 2 m / sec; a powder material having a density of 2.5 g / cm, the speed is not less than 3.5 m / sec; a powder having a density of 4 g / cm 3, a minimum speed of 4 meters per second. Due to the complexity of the situation, the appropriate airflow rate in each particular situation should be determined by experiments.

In the rising airflow, the water flow rate required to suspend a certain density and particle size is greater than the calculated value of free settling, which is due to the uneven distribution of the airflow along the pulverizing chamber portion.
The Turbo Mill for Phenolic ResiN has a wide range of unclear, high pulverization efficiency, high pulverization accuracy, accurate cutting particle size, and good stability.

AlPa Cassava Starch Turbo Mill for Phenolic Resin Case Sharing: This customer is a new panel industry, dedicated to providing professional and excellent plywood new fillers for plywood industry customers. Starch ultrafine pulverization equipment is required during the production process of the company. Multi-party examine, finally purchased the CSM1100-V mechanical grinder from our AlPa.
Technical parameters:

Production capacity: 2T


Shandong AlPa is a well-known particle and powder processing system supplier, dedicated to tradition Change in the powder industry. We provide customized and through CE certified products: airflow pulverizer, mechanical pulverizer, airflow classifier, ball milling production line, surface modification production line, etc. In the field of medical, food, chemical, minerals, new materials, solid waste disposal, we have a mature system. We offer more than just machines. We help you design the ideal system to meet your needs. In the past 20 years, "the future of the advanced materials in powder technology" has always been our business mission. We look forward to and desire to embrace the future. To this end, we have made full preparation. We wish to grow with you.