cell mill of Donkey hide gelatin powder

Environmentally friendly Cell Mill of Donkey Hide Gelatin Powder has gradually become the market leading to mechanical equipment, and the modern new mechanical equipment in the machinery and manufacturing industries in the stage has gradually replaced traditional coarse machining production. The production also became a new dominant leading to the implementation of technological innovation upgrades at this stage.

The principle of pulverization is substantially the same as the hydraulic level, and the above settlement theory can also be used for airflow classification. However, in the airflow classification, since the density and viscosity of the air are much smaller than the density and viscosity of water, the same particles are more settled in the air than in the water. Moreover, the density and viscosity of the air vary with temperature and pressure.

In order to cause air flow, wind pulverization equipment typically requires an appropriate fan (exhaust or blast).

When the airflow is classified, the fine product is usually taken away by the airflow. In some cases, the raw material is sent to a pulverized device from the airflow.

As is well known, the load of solid particles in the air under normal pressure does not exceed 500 g / m3 air. When it reaches 1 kg / m3, the particles fall from the airflow. The load is related to the density and particle size of the particles. When the fine particle material is treated, the load generally does not exceed 200 to 300 g / 3 air. According to this calculation, the volume concentration in the gas stream is much smaller than 0.03. Therefore, when the airflow is classified, in most cases, it belongs to the free settlement.

The speed required to move the particulate material in the horizontal and vertical direction is relatively large, and the speed required in the horizontal direction is relatively large, and as the particle density increases, for example, for the density 1.5 of the pulverized coal and Western / cubic centimeter. The minimum wind speed is 2 m / sec; a powder material having a density of 2.5 g / cm, the speed is not less than 3.5 m / sec; a powder having a density of 4 g / cm 3, a minimum speed of 4 meters per second. Due to the complexity of the situation, the appropriate airflow rate in each particular situation should be determined by experiments.

In the stream, the airflow speed required to suspend the particles having a certain density and particle size is greater than the calculated value of free settling, which is due to the unevenness of the velocity distribution along the pulverizing chamber portion.

This Cell Mill of Donkey Hide Gelatin Powder has a wide comminuted range, high pulverization efficiency, high pulverization accuracy, accurate cutting particle size, and good stability.

ALPA Total Powder Cell Mill of Donkey Hide Gelatin Powder Experiment: Talp powder classifier is the equipment that is often used in talc powder production, and our AlPA classifier has excellent performance, there are many talc production companies. Come to our company for talc grading experiments. Product size: D50: 5.3μm production: 230kg / h

To learn more about Cell Mill of Donkey Hide Gelatin Powder, you will go to Shandong AlPa Powder Technology Co., Ltd., the company is in research and production of crusher and crusher related products, quality, and is deeply consumed. Welcome, trustworthy.