Hammer Mill of bran

in this area's booming economy, a lot of people know jet mill, Hammer Mill of bran technology leader in the industry.

Many of the processing to be pulverized manufacturers will choose to buy a Hammer Mill of bran, but not all may be suitable mill production and processing, error processing method that will mill faster wear rate. The wear of the pulverizer is too fast, and the inner cavity of the pulverizer of the comparison should be used when the material hardness is too large.

The device operates for a long time in a higher pulverized pressure, which requires uniformity of cyclical replacement loss.

The products after the crushing are generally single peaks. If there is a double-peak or peak main reason, the pulverization pressure is unstable. The solution is based on the gas supply of gas source equipment to meet the amount of gas required for work, ensuring that the lowest air supply pressure of the gas is high than the working pressure.
The feed speed is unstable. Solution to check if there is a blockage at the feed valve; the material is not very viscous, uniform in liquidity, and the stable control feed speed. The filter cake is formed in the pulverizer chamber. The solution is suspended, and the filter cake in the pulverizer chamber will then restore production.

ALPA chondroitin Hammer Mill of bran Case Study: The company is active biological extracts professional manufacturer, an attritor need to meet the requirements of GMP, a number of inspection equipment manufacturers powder, and finally the purchase we ALPA's Hammer Mill of bran.
Technical parameters:
The product size: 100 allpass
capacity: 120KG

Powder Co., Ltd. Shandong ALPA fully bent Hammer Mill of bran, has a mature technology process, there is a high-energy R & D team, specializing in mill development, quality of survival, welcome to come to counseling.